Mini 225mm Race Quadcopter frame “Wolfbone225” v1

Here is a new racing quad I designed. I call it Wolfbone225. Its free to download the .stl files at Shapeways or have them print one out for you. While its free to use, please do not sell it commercially without my prior approval. Creative Commons Attribution-NonCommercial 4.0 International

RCGroups discussion thread here.


camera lid:

printable on a 220mm bed, XYZ DaVinci 1.0 with Repetier firmware. Printed with Hatchbox ABS.

P1010470 (Large)Printed in ABS, 50% infillP1010471 (Large) P1010472 (Large) P1010475 (Large)87.72g with 50% infill

P1010479 (Large)6″ props above clear the dome, but its close. 5″ bull-nose props may be the best fit.



The Wolfbone225 is ready to win. Designed in the USA.

Be sure to add the optional FPV canopy!

300-400g AUW with battery, depending on your build

4″, 5″, 6″, prop ready

2204 2300kv ready

—- recommended parts —-

Cobra or Sunnysky 2204 2300kv
KISS 30a or DYS, mini esc mounted vertically in arm slot. Or all-in one ESC in center, qbrain. Blheli + oneshot.
Frsky X4R-SB with Taranis Plus
Acro Naze32 or Afro mini, borisB beta flight and accelerometer disabled.
Pololu 5v 600mah Stepdown “BEC”
PZ0420m 5V 600TVL Mini Camera or super mini cam
DTF/Hawkeye 5.8ghz 200mw video, or Lumeneer Race band 5.8, or ET200
HQ Prop 6×4.5 or Dal 5045 bull nose prop
Nanotech 1000mah 4S 45C battery, or 3S if you want a milder ride



Leave a Reply